While many property owners have asphalt surfaces, they do not always have them coated and protected. Without this protective sealcoating layer, you can notice the difference in the appearance and the condition of your roads, driveways, pavement, and walkways over time. One of the main reasons that property owners do not invest in sealcoating in Orlando is because that do not have full understanding of all the benefits that it offers. These rare a few of the facts you should understand about sealcoating before you invest in the services.
What is asphalt sealcoating? To understand what sealcoating is, you need to know the compound makeup of your asphalt. To make it simple, asphalt pavement consists of rock, gravel, stone, and a binder. The binder will hold it all together and is commonly referred to as asphalt cement. It is created from the distillation of crude oils. Basically, you want to protect this binder for as long as you can.
By sealcoating your asphalt surfaces, you are providing a layer of protection that will block out the damaging factors, such as:
On top of this protection, if you follow manufacturers' specifications, you also get a slip resistant surface that shines with a beautiful deep black finish. When you apply a thin liquid layer of sealcoating, you are protecting the binder and asphalt from so many damaging influences, you are doing yourself a favor really.
Keep in mind that sealcoating only protects future damage. Sustained damage will not be affected. This means that any cracks your asphalt already has will not be repaired by the sealcoating. Most importantly, more so than the protection it offers, sealcoating will extend the lifespan of the asphalt surface.
You are saving money in the long run with the affordability of regular sealcoating. When you extend the lifespan, you are saving money on long-term repairs. By doing preventative maintenance and caring for your asphalt over its lifespan, you save yourself from having to invest in premature replacements.
There is a cleaning phase you must undergo before you can sealcoat your asphalt. Remove any dirt, contaminants, and debris, fill in the cracks and potholes, perform other minor repairs, and thoroughly (and properly) clean off any vehicle fluids. This cleaning process will allow the sealcoating layer to bind properly to the asphalt surface, which will allow it to truly protect the interior structure of your pavement.
It is recommended that you sealcoat your asphalt surfaces at a temperature of 55 degrees Fahrenheit. The ideal conditions include that temperature remaining for eight hours after the application process.
These are a few facts that can help you better understand the benefits and role of sealcoating in Orlando. Because asphalt pavement becomes faded over time, you will want to use sealcoating to keep your pavement looking vibrant, smooth, and like brand new each year. Contact Florida Seal Coating to receive a free quote for your sealcoating services toay.